Technical Parameter
Item NO. |
Description |
Offered Specification |
1.0 |
Roll forming machine | |
1.1 |
Rolling speed | Up 15m/min(not include cutting time) |
1.2 |
Rolling thickness | 0.3--3.0mm |
1.3 |
Raw material | Galvanized steel sheet |
1.4 |
dimension | 3500×1600×1500(mm) |
1.5 |
Effective width | 60mm |
1.6 |
Roller stations |
20 stations One stage for embossing
|
1.7 |
Roller material | 45#forge steel, coated with chrome |
1.8 |
Shaft diameter | Φ70mm ,material is 45# forge steel |
1.9 |
Transmission | By chain 1 inch |
1.10 |
Material of chain | 45# forged steel with frequency quenching, 12A |
1.11 |
Material of cutting | Cr12Mov with quench HRC58-62° |
1.12 |
Tolerance of cutting | 6m+-0.5mm |
1.13 |
Frame |
H type steel |
Main Components
3 tons manual de-coiler----------------------------------------------------------1 set
Infeed guiding----------------------------------------------------------------------1 set
Main roll forming machine--------------------------------------------------------1 set
Straighten device------------------------------------------------------------------1 set
Hydraulic cutting equipment------------------------------------------------------1 set
Output table--------------------------------------------------------------------------2 sets
Main drive-----------------------------------------------------------------------------1 set
Hydraulic system---------------------------------------------------------------------1 set
Controlling system (including cabinet)--------------------------------------------1 set
Downpipe elbow forming machine--------------------------------------------------1 set
Seaming machine----------------------------------------------------------------------1 set
Working Flow of Roll Forming Machine
Standard profile of product
Photo Gallery
FAQ
1). Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
Besides, the width is adjustable.
2). Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
3). How to visit your company?
Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Wuxi Station (30 minutes), then we can pick up you.
4). What can you do if the machine broken?
Our machines' warranty period is 12 months, if the broken parts can't repair, we will send the new parts replace the broken parts for free, but you need pay the express cost If after warranty period, we can through negotiation to solve the problems, and we supply the technical support for the whole life of the machine.
5). Can you be responsible for transport?
Yes, please tell me the destination port or address. we have rich experience in transportation.
6). You are trade company or factory?
We are factories.
7). Why your price is higher than others?
As we persist on that factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem.
8). How long the machine could be made?
Normally speaking, deck floor roll forming machine could be made about 60 working days. If you need machines in a hurry, we can try it short time
Contact Us at Any Time