|
Product Details:
|
| Steel Thickness: | 0.7-1.2mm | Roller Stations: | 28-30 Stations |
|---|---|---|---|
| Way Of Drive: | Single Chain | Main Motor Power: | 22Kw |
| Forming Speed: | 10-12m/min | Use: | Floor |
| Material Of Cutting: | Cr12Mov Steel | Cutting Mode: | Hydraulic Cutting |
| High Light: | steel forming machines,corrugated roll forming machine |
||
Steel Sheet Floor Deck Tile Roll Forming Machine / Metal Deck Roll Forming Equipment
Product Description
The complete metal deck roll forming machine line includes decoiler, main machine, computer controlling system and run out table. Metal decks with various thicknesses are new building materials. The metal decks produced by our metal deck roll forming line machinery are widely used as floor or roof of building. They are used as the floors or roofs of building because of low cost, light weight but high strength, short building period, and re-cycle use. Common roll forming deck profiles cover roof deck, floor deck, bridge deck, specialty deck, etc.
The finished product are of many features,such as simple shape,large wave height,high intensity and good adhesiveness when pouring the concrete together with the welded steel wire net on-site,in the high story building,it not only can save steel mould board,but also reduce the bearing of the floor: on basis of equal capacity,it reduces the steel amount of engineering useage,so that it saves cost of investment.
We can design different kinds of profile and fitting for steel deck machine,as per customers’ requirements.
Technical Parameter
|
Item NO |
Name |
Description |
|
1 |
Total power |
Motor power-22kw Hydraulic power-7.5kw |
|
2 |
Rows of rollers |
28-30 rows |
|
3 |
Productivity |
10-12m/min |
|
4 |
Diameter of shaft |
9mm |
|
5 |
Voltage |
380V 50Hz 3Phases |
|
6 |
Machine body |
H-model Steel |
|
7 |
Shafts |
45# steel quenching treatment |
|
8 |
Rollers |
Gcr15 forge steel, coated with chrome |
|
9 |
Width of the raw material/ feeding width |
1000mm |
|
10 |
Effective width |
688mm |
|
11 |
Electrical Control System |
Panasonic Japan |
|
12 |
Cutting accuracy |
1.5mm |
|
13 |
Hydraulic Station Pressure |
12Mpa |
|
14 |
Weight |
10 tons |
Main Components
|
Uncoiler |
1 set |
|
Guiding Equipment |
1 set |
|
Roll Forming Equipment |
1 set |
|
Post Cut Equipment |
1 set |
|
Hydraulic Station |
1 pc |
|
PLC Control |
1 pc |
|
Supporter Table |
2 pc |
Working Flow of Roll Forming Machine
Profile of product
Deck floor machine photo
Contact Person: Miss. Spring Wu
Tel: +86-13606193016
Fax: 86-510-8827-6675
