Technical Parameter
Item NO. |
Description |
Offered specification |
1.0 | Roll forming machine | |
1.1 | Rolling speed | 6--9 m per min(not include cutting time) |
1.2 | Rolling thickness | 0.8mm--1.5mm |
1.3 | Raw material | Galvanized steel sheet |
1.4 | dimension | 12000mm*1200mm*900mm |
1.5 | Effective width | 200mm |
1.6 | Roller stations |
About 22stations
|
1.7 | Roller material | 45# steel, coated with chrome, Quenching |
1.8 | Shaft diameter | Φ70mm ,material is 45# forge steel |
1.9 | Transmission | Gearbox |
1.10 | Material of chain | 45# forged steel with frequency quenching, 12A |
1.11 | Material of cutting | Cr12Mov with quench HRC58-62° |
1.12 | Cutting Tolerance | 6m+- 0.5mm |
Main Components
S.N |
Equipment Name |
Quantity |
1 | 3T Manual Decoiler | 1 set |
2 | Leveling device | 1 set |
3 | Servo feeding device | 1 unit |
4 | Press machineJH 21-63 | 1 unit |
5 | Main roll forming machine | 1 set |
6 | Cutting holder | 1 set |
7 | Hydraulic station | 1 set |
8 | Control system ( including control box) | 1 set |
9 | Out tables | 2 sets |
10 | Spare parts | 1 package |
11 | Cutting dies | 1 set |
12 | Punching die | 1 set |
Working Flow of Roll Forming Machine
A. Passive Decoiler..........................................................To load and uncoiling material
B. Servo Feeding Applicator............................................To feed the material accurately
C. Hydraulic/Press Punching...........................................To punch as requirements
D. Roll Forming Unit.........................................................To roll form as requirements
E. Hydraulic Cutting.........................................................To cut sheets as desired length
F. Output Table................................................................Support the finished products
Decoiler----feedingwithguide---Punching----Rollforming----Cutting----Products collecting
Main profile drawing show
Machine Components
Contact Us at Any Time