30 Meters Per Minute High Speed 36" Width PBR Panel Metal Roofing Panel Roll Forming Machine
This roof machine is to make PBR panel, similar R panel And AG Panel, this line includes 5 tons hydraulic decoiler, or5 tons manual decoiler for your optional, pre-cutting device, plastic film device, roll forming machine part, servo following cutting, and finished products receiving table, also auto stackers for your optional.
The normal machinable thickness range of our roof panel roll forming machine is 0.3mm-0.8mm ( 29 gauge- 26 gauge steel), working raw material is Aluminum, PPGI, Galvanized steel, Galvalume steel etc. We design the machine according to your drawing, specially the pitch and height of each wave.
Technical Parameter
S.N | Items | Descriptions |
1 | Rolling Speed | 30m/min(cutting time is included) |
2 | Steel sheet Thickness | 0.3-0.8mm color painted sheets and galvanized steel |
3 | Coil width | as profile |
4 | Control System | PLC Delta or Panasonic |
5 | Roller Stations | about 22 stations |
6 | Roller Material | 45# forge steel, coated with chrome |
7 | Shaft Material and DIA | ¢70mm,material is 45# forge steel, Chrome with quenching |
8 | Main Motor Power | 7.5*2kw |
9 | Hydraulic Pressure | 12Mpa |
10 | Wall plate thickness | 16mm |
11 | Tolerance | +-1.5mm |
12 | Power supplier | 220V, 60HZ,3 phase or 480V |
13 | Way Of Drive | 1 inch single chain |
14 | Color Of The Machine | Blue |
15 | The size of the forming machine | 13000*1600*1200mm |
16 | Machine weight | about 10 tons |
Machine Component
5 T hydraulic de-coiler with coil car |
1 set |
PBR roof roll forming machine |
1 set |
Pre cutting device with plastic film |
1 set |
PLC Control box |
1 set |
Hydraulic station |
1 set |
4 meters conveyor |
1 set |
6 meters auto stacker optional |
1 set |
servo following cutting device | 1 set |
Application
PBR panel stands for purlin bearing R panel. This means that the panels have a larger overlap section that completely overlaps the next panel. This creates more metal to metal contact which yields a stronger connection and more weather-tight metal roof panels.
PBR metal panels are a low-maintenance, durable alternative to conventional roofing. The PBR panel profile adds extra protection against the elements by including a purlin bearing leg that overlaps between panels sealing out moisture and wind. These panels can be installed either on a solid substrate or open framing such as metal purlins or wood support beams.
Profile Drawing
PBR machine machine photo
Contact Us at Any Time