0.3 - 0.8mm Drip Edge Roll Forming Machine Galvanized Steel Roof Trim Edge

0.3-0.8mm Thickness Galvanized Steel Roof Trim Edge Making Machine Drip Edge Roll Forming Machine

* Raw materials it rolls: Pre-painted steel coils; Aluminum, Galvalum, Galvanized etc
* Material thickness: 0.28-0.8mm (PPGI,GI,GA,PPGA), 0.8-1.2mm(Aluminum)
* Capacity of De-coiler: 5 TONS
* Rollforming stations: 18 stations
* Roller materials: 45# steel with tempering treatment and chrome coating treatment
* Shaft diameter: 70mm
* Safety option: Safety Cover eqiupped
* Cutting: Hydraulic cutoff
* Material of Cutting blade: Cr12 steel
* Control unit: PLC control to ensure the machine to run both automatically and manually.

Profile Drawing

Application

Maintance and the service of the machine

Daily maintenance with meticulous care plays an important part in extension the equipments’ operation time and the quality of rolling plank. Therefore, please do the following things in your daily

1.The hydraulic tank must be filled with 32# or 46# hydraulic oil before using. The amount of oil is subject to the oil mark
2. Add and daub lube often to the outside parts. (Such as driving chain,Scissors, gears, rollers, )
3. Wipe the surface dust of roller often and particularly work outside. If you do not use it for long time ,you should daub
machine and lube in the roller surface and you need clean it when you use next time.
4. If the equipment does not use for long time, you should use plastics cloth or other articles to cover it and notice to avoid
rain and damp, especially electrical controlling box
5. Cutting device should add lube to the places where need lube to the request
6. Usually look into hydraulic station and the oil quantity of deceleration machine, you should add in time when oil quantity
shortage
7. Electrical components should be guaranteed to work in a dry environment, such as damp. Rain should continue to work after drying.