15 Steps Of Forming C Purlin Cold Roll Forming Machine High Speed 0-12m/min
1. Technical Parameter
Products specification: C80-300. thickness: 2-3mm. Yield strength: 250Mpa max.
Running speed: 0-12m/min.
Main shaft material: 45# steel, Q&T treatment
Main axis diameter: ￠75mm
Roller material: GCr15 bearing steel, Qunching heat treatment, surface black finish. Rigidity:HRC58-62.
Roller groups: 15 groups main rollers
Levelling roller: 7 rollers levelling device
Main motor power: 11KW;
Hydraulic station motor power: 5.5KW
Punching station: 2 punch device
Electrical control system: Whole line adopted PLC control, Panasonic PLC.
Cutting method: Hydraulic powered, automatically cut to length after roll forming
Cutting mold material: Cr12 quenching treatment
Uncoiling: by 5T Manual uncoiler
Drive way: 1.5 inch double chain
Machine dimension: 8m L X 0.88 m W X 1.0 m H
Machine weight: about 8 tons.
2. Working Flow
Uncoiling - Infeed guiding & Levelling- Roll forming- Cut to Length-Out put table
3. Machine Components
| S.N |
Equipment name |
Quantity |
| 1 |
3T manual uncoiler |
1 set |
| 2 |
Levelling device |
1 unit |
| 3 |
Punching station (including punching mould) |
1 unit |
| 4 |
Main roll forming machine |
1 unit |
| 5 |
Main drive |
1 unit |
| 6 |
Cutting unit |
1 unit |
| 7 |
Hydraulic stations |
1 set |
| 8 |
Control system ( including control cabinet)
|
1 set |
| 9 |
Out put table |
1 set |
| 10 |
Cutting mould |
4 sets |
4. Machine Photo
Your message must be between 20-3,000 characters!
