|
Product Details:
|
| Material: | 0.8-1.5mm | Roller Stands: | About 13 Stands |
|---|---|---|---|
| Roller Material: | 45# Steel, Quenched HRC 58-62 | Specification: | K Span Roll Forming Machine |
| Control System: | PLC(BUTTON STYLE) | Cutting Mode: | Hydraulic Cutting |
| Cutting Blade: | Cr12 Mov | Size: | 8900*2250*2300mm |
| Weight: | About 8 T | Tolerance: | 1mm |
| High Light: | metal forming machine,tube forming machine |
||
Hydraulic Cutting K Style Long Span Roll Forming Machine For Warehouse
Technical Data
| Size: | 8900mm × 2250mm × 2300mm | |
| Total Weight: | about 8 T | |
| Roller station | 13 steps | |
|
Total Motor Power (15 KW) |
Forming | 5.5 kw |
| Bending | 4.0 kw | |
| Cutting | 4.0 kw | |
| Seaming | 1.5 kw | |
| Working speed | Forming | 15m/min |
| Bending | 13m/min | |
| Seaming | 6 m/min | |
| Cutting blade | Cr12 Mov | |
| Cutting mode | Hydraulic | |
| Material of rollers: | 45# steel, quenched HRC 58-62 | |
| Material of shaft | 45# steel, quenched HRC 58-62 | |
| Controlling | PLC (button style) | |
| Power supply | 220V / 60 HZ / 3 PHASES | |
Technological process
Uncoiling—Feeding&Leveling ---Roll forming—Cutting—Products collecting
Machine Components
| Name | Usage | Qty |
|
De-coiler (core shaft and cradle) |
Hold and feed the coils | 1 |
| Seaming machine | Assembling the sheets | 1 |
| Straight sheets cradle | Plate supporter | 8 |
| Arch sheets cradle | Plate supporter | 8 |
|
Straight sheets side Cradle |
Plate supporter | 8 |
| Suspender | Lifting arching sheet roof | 1 |
| Clamp | Bait sheets | 8 |
| Hanger | Lifting arching sheet roof | 8 |
| Manual Super pliers | Bait sheets | 1 |
| VCD | Teach customers how to produce | 1 |
| Driving chains | To roll the gears | 3 M |
| Chain half section | As spare | 5 |
| Chain whole section | As spare | 3 |
| Instruction book | To guide you how to use the machine | 1 |
|
Manual calculator (electric sensing equipment) |
Measure the length by hand | 1 |
| Hand crank | To rise and fall the machine | 2 |
|
Polish wax
|
Maintenance | 1 |
Details of Each Composition
15 ton hydraulic decoiler with coil car
(1) Cutting motion: stop cutting
(2) Material of blade: CR12mov with heat treatment
(3) Length measuring: Automatic length measuring
(4) Tolerance of length: +/- 1.5mm
(1)power supply: 415V, 50Hz, 3Phase
(2)automatic length measurement
(3)automatic quantity measurement
(4)computer used to control length & quantity.Machine will automatically cut to length and stop then required quantity is achieved
(5)length inaccuracy can be amended easily
(6)control panel : button type switch and touch screen
(7)unit of length: millimeter (switched on the control panel)
It adopts welded steel and supported roller to transmit the products.
Size: 2000*1000*1000mm, 2 pieces
Profile
Contact Person: Spring Wu
Tel: +86-13606193016
