|
Product Details:
|
| Steel Thickness: | 0.21-3.0 Mm | Forming Speed: | Fast Than 16m/ Min |
|---|---|---|---|
| Power Supply: | 380V, 50Hz, 3Phase | Dirve System: | Chain Driving |
| Control System: | PLC System | Machine Weight: | About 10 Tons |
| High Light: | Slip Roll Forming Machine,Metal Roofing Roll Forming Machine |
||
Roof and wall panel double layer roll forming machine
Technical Parameter
|
Item NO |
Description |
Offered specification |
|
1.1 |
Rolling speed | UP to 16 m/min(not include cutting time) |
|
1.2 |
Rolling thickness | 0.21-3.0mm |
|
1.3 |
Raw material | Color painted coils |
|
1.4 |
Dimension | About 8000×1600×1200(mm) |
|
1.5 |
Effective width | 836mm |
|
1.6 |
Feeding Coil width | 1000mm |
|
1.7 |
Roller stations | About 18 stations |
|
1.8 |
Roller material | 45#forge steel, coated with chrome |
|
1.9 |
Shaft diameter | Φ76mm |
|
1.10 |
Transmission | By chain 1.2 inch |
| 1.11 | Material of chain | 45# forged steel with frequency quenching, 12A |
|
1.12 |
Material of cutting | Cr12Mov with quench HRC58-62° |
|
1.13 |
Tolerance | 10m+-1.5mm |
| 1.14 | Hydraulic station |
4kw |
Main Components
|
Commodity & Description |
Quantity |
|
5T manual uncoiler |
1 set |
|
Leveing guiding |
1 set |
|
Servo feeding device |
1 set |
|
Main roll forming machine |
1 set |
|
Hydraulic station |
1 set |
|
Cutting device |
1 set |
|
Finished products tabel |
1 set |
|
PLC control system |
1set |
|
Out tables |
2 sets |
|
Spare parts |
1 set |
Working Flow of Roll Forming Machine
A.Passive Decoiler..........................................................
B.Servo Feeding Applicator............................................
C.Hydraulic/Press Punching...........................................
D.Roll Forming Unit.........................................................
E.Hydraulic Cutting.........................................................
F.Output Table................................................................
Standard Profile of Product
Loading pictures
After-sale Serive
- After machine arrive the destination, by the request of the buyer , the seller will provide 1 technical engineer to guide installation and training , and the buyer should give the technical person with full cooperated.
- Installation period: about 7 days after the complete preparation by the buyer such as the foundation and all necessary accessories.
- Training time: 5 days.
- Before departure of the engineers from seller, the buyer should pay for installation and commissioning fee 100$/day to the point account of the seller. The two-way ticket,visa, food, hotel , the translator and insurance are all should provide by buyer with full responsibility.
-The seller supply technical data (including forming mould drawing, electrical elements drawing and equipment drawing etc.)
Contact Person: Spring Wu
Tel: +86-13606193016
