Product Details:
|
Material Thickness: | 0.4-0.8mm, Galvanized Steel | Forming Speed: | 20m/min |
---|---|---|---|
Roller Stations: | 9 Stations | Main Motor Power: | 5,5Kw |
Hydraulic Power: | 4Kw | Warranty: | 12 Months |
Roller Material: | 45# Steel With Quenching 60mm Shaft | Material Of Cutting: | CR12 With Quench Treatment |
Control System: | PLC Control System | Way Of Drive: | 1 Inch Single Chain |
High Light: | drywall stud roll forming machine,metal stud forming machine |
High Speed Automatic 20m/min Wall Angle Roll Forming Equipment With Follow Cutting
1. Technical Parameter
Material of coil | Material Thickness | 0.4-0.8 mm galvanized sheet G550 |
Forming system | Rolling Speed | About 20 m/min line speed |
| Roller Stations | About 9 stations |
| Roller Material | 45# Steel with quenching 60mm shaft |
| Maim Motor Power | 5.5 kw |
| Hydraulic cutting Power | 4 kw |
Cutting | Material Of Cutting | CR12 with quench treatment |
| Hardness | HRC58-62 |
| Tolerance | +-1.5mm |
Electrical control system | Electric Source | 380V, 50HZ,3 phase |
| Control System | PLC control system |
| Weight | About 2.5 tons |
| Way Of Drive | 1 inch single chain |
| Size of machine | Length 4500mm* Width 500mm* Height 800m |
2. Flow Chart
Decoiler—feedingwithguide—Rollforming——Cutting—Products collecting
3. Machine Components
3 ton passive de-coiler | 1 set |
Main roll forming machine | 1 set |
PLC Control box | 1 unit |
Hydraulic station | 1 unit |
Out table | 2 units |
Following cutting | 1 unit |
Safety cover | 1 unit |
4. Machine Photo
Contact Person: Celia Wang
Tel: +8618961613016